- 20″ single-stage coarse filter, triple-stage fat filtration.
- Treating tap water used for the entire domestic water system.
- Filter dimensions: 133*200*560mm
- Corresponding water pressure: 0.15-0.3MPA
- Filtration flow rate: 400L/h
- Filter core: PP 20 thick core
- Installation location: At the water inlet before entering the tank or for use.
Filtration process and filter function:
|
Component name |
Structure |
Function |
Filter replacement time |
|
Filter cartridge number 1 PP-10 -4 |
PP fiber, 0.5 micron pore size. | Prevents dirt, mud, and rust particles larger than or equal to 0.5 micron. | Every 6 months, which is equivalent to 18,000 liters. |
How to install a whole-house water filter:
There are many suitable installation methods depending on the user’s needs. Generally, there are several basic methods preferred by many households:
*How to install a water filter:
Install this whole-house water filter at the outlet of the pump carrying water from the underground tank to the upper floor (before it enters the water storage tank).
*Instructions for installing the second water filter:
Install a water filter right at the water outlet from the tank before the water enters water-using devices such as solar water heaters, bathroom fixtures, etc.
*How to install the third water filter:
Installing a water filter before the water supply line to the washing machine will help whiten clothes more effectively and extend the lifespan of the washing machine.
